Graphite Bed Plate For VzBot 330

Graphite Bed Plate for VzBot 330 printers

• Ultra-flat: within 0.1mm flatness
• No warping: bed stays super flat at 120C as well as at 60C. No need to heatsink the bed for long time like aluminum beds.
• Maximum bed temperature 130-140C. At 150C you will trigger the self-recovery thermal switch so the heater will be turned off.
• It is over 30% lighter than aluminum.
• Works with Eddy current sensors (Cartographer, Beacon, BTT Eddy). Magnetic sheet and build plate are enough for eddy current sensor to work properly.
  
  These plates were tested for months before the release, showing excellent results.

Includes:

1x Graphite plate